Pygate with PoE
NOTE: Just add a WiPy, LoPy4 or GPy to provide the processing capabilities as well as the ability to connect to the Internet, radio control and baseband processing.
Pygate is Pycom’s latest hardware tech portfolio addition.
This is a new super low-cost 8-channel LoRaWAN gateway that comes in the shape of a shield. It’s got the well-known form factor from our other shields and you can connect your much loved WiPy3, LoPy4 or a GPy to it. Hook in your Pycom development boards up and you have yourself a nifty little decentralized IoT network in one go. Pygate also fits inside the Universal IP67 Case so you don’t have to limit yourself to indoors.
Connect a WiPy3, LoPy4 or a GPy to this shield and then hook in all your other Pycom devices and you have yourself a nifty little decentralised IoT network in one go.
- Dual SX1257 transceivers for a total of 8 channels support
- Frequencies: 863-870 MHz and 902-928 MHz
- Baseband processor: SX1308
- Compatible with WiPy3.0, GPy and LoP4
- Ultra-low power standby mode
- Ethernet with PoE via the optional daughter board
- Powered via USB, LiPo Battery and Ethernet via the optional daughter board
- LiPo battery charging via the USB port
- USB to serial connection for the Pycom module with auto-programming features
- Dimensions: 65 (W) x 50 (L) x 8 (H) mm
(Same small form factor as the Expansion Board v3.0/v3.1)
- Fits the universal IP67 Case for outdoor use
PoE Adapter Specification
(This is optional and must be purchased separately)
PoE (Power Over Ethernet) with 1.5A current delivery.
It can provide power for the Pygate and the Pycom module attached to it.
10BASE-T and 100BASE-TX Physical Layer Support
Auto-Negotiation: 10/100 Mbps Full- and HalfDuplex
Plug and play compatibility with Pygate.
Works transparently using the TCP/IP stack embedded into our MicroPython modules.
Dimensions: 21 (W) x 55 (L) x 32 (H) mm
Important Note: Pygate is not compatible with FiPy.