Sale!
ModularCaseB+1
mmp-black-case-no-sd-800x609[1]
4 out of 5 based on 1 customer rating
(1 customer review)

ModMyPi Modular RPi B+/2/3 Case – Black

8.11 USD 7.36 USD

In stock

Product Description

New Updated Version  – Compatible with both Raspberry Pi 2 and 3 with Dual Light Pipes! The ModMyPi Modular Raspberry Pi case!

The new ModMyPi deluxe Raspberry Pi 2/3 Model B case is a fully customisable and adaptable modular unit aimed to suit a range of Raspberry Pi applications. Designed with a stealth look and integrated LED lights pipes, it’s the perfect accessory to any Raspberry Pi enthusiast’s tool kit!

The Modular Case comes equipped with a range of customisable modular features including optional optical window, stackable 10mm spacer plates, micro SD card cover, dual-use USB & HDMI security shroud, secure screw locking, VESA adaptors, and internal SD card holder.

Spacer plates are designed to be stacked up to 5 spacers high, so you can grow your Pi case with your project! Additional Screws are Required for more than 1 Spacer.

The ModMyPI Modular RPi Case Features:
  • Raspberry Pi 2/3 Model B and B+ Two Part (Lid & Base) Plastic Case
  • LED Status Light Pipes
  • Stealth Streamlined Look
  • Clip Fit Raspberry Pi Mount with Optional Screw Locking (Included)
  • Positive and Secure Case Locking via Screws (Included)
  • Designed for Hacking – Extra Large Internal Room for Breakout Boards
  • Airflow – Internal Volume Perfect for Adding Heat Sinks & Keeping your Pi Cool
  • GPIO 40 Pin Ribbon Cable Slot
  • CSI Camera Cable Cable Slot
  • DSI LCD Video Cable Slot
  • GPIO Fly-Through Cable Slot for Smart Power Supply Switches
  • Additional Internal SD Card Holder
  • In-Built Four Point 50mm M3 Mount & Two Point 40mm M3 Wall Mount Features
  • Matt Finish Body with Gloss Cap
  • Optical See-Through Window (Clear Version Only)
  • Available in a Range of Colours Including Black, Blue, Clear, White and Raspberry
  • Designed in the UK
  • Strong & Durable ABS Plastic
  • Case Dimensions:
    • Length: 104.95mm
    • Width: 74.95mm
    • Height: 36.00mm
  • Internal Dimensional Volume for Breakout Boards:
    • Length: 90.00mm
    • Width: 58.50mm
    • Height*: 25.70mm (*Measured from Top of RPi PCB to Internal Top of Lid)
    • Internal Volume HAT Compliant
Modular Add-On Options Include the Following:
  • Micro SD Card Cover
    • Flush, Lockable and Tamper-Proof.
    • Secure your Micro SD Card from Probing Fingers
    • Protect your Micro SD Card from Accidental Knocks & Bangs
  • 10mm Stackable Spacers
    • Makes Your Case Compatible with 99% of Breakout Boards
    • Spacers Raise Internal Height by 10mm Enabling the Case to Grow with your Project
    • Spacers can be Stacked Increasing Internal Height by up to 50mm or more!
    • Great for Embedded Applications, and Hobbyist Projects
  • USB & HDMI Security Cover
    • Dual-Use – Compatible with Either Set of I/O Ports e.g. HDMI or USB Side
    • Secure and Tamper-Proof
    • RJ45 & Micro USB Power Breakout Hatches
    • Off-Set to Enable the Use & Internal Protection of up to 4 Nano USB Dongles!
  • VESA Mounts

Downloads

1 review for ModMyPi Modular RPi B+/2/3 Case – Black

  1. 4 out of 5

    (verified owner):

    Overall: a good case but not without annoyances; consider your purposes before choosing this over others.

    Pros:
    – precision moulding, board fits well, ports line up well, good quality
    – feels solid when screwed together
    – good for a ‘finished product’ that is essentially sealed and infrequently opened, especially if you add port covers
    – enough space inside, even without spacers, for extra components and low-ish profile HATS
    – mounting holes on base to attach to wall, etc., with screws
    – can add covers for ports

    Cons:
    – board needs to be attached with 4 screws – no snap-in mounting
    – lid needs to be screwed on, too. Very bothersome if you need to open/close the case during development. Consider a ‘snap together’ case if you want to open it up lots.
    – no ‘bumper’ feet included with the kit (it would just be nicer if they came with the case…)
    – port and SD card slot covers NOT included with case

Add a review