Hakko FX-100 RF Induction Heat Soldering System

$695.00 $595.00

Out of stock

Notify me when item is back in stock

SKU: 2086 Categories: , Tag:


Power. Stability. Accuracy. Efficiency. RF induction heat technology at it’s best. The 13.56 MHz soldering iron connector works with “other” 13.56 MHz RF induction heat soldering stations, too. Just connect and turn the station on. No calibration required.

The FX-100 soldering system brings RF induction heat soldering technology to an even higher performance level. This small, compact station includes microprocessor control that boost the recovery performance of the soldering iron tip, and an Advanced System Design optimizes performance by reducing the loss of power in the system while maintaining the lowest EMI levels to meet applicable standards, especially for work with sensitive devices.

The system is simple to operate — just plug it in and turn it on. No calibration required.

Note: All shipments of HAKKO FX-100 with serial number 51002160000275 or higher will include the new yellow tip cleaning sponge.

FX-100 features

  • User selectable Power Activity Display providing constant dynamic feedback to the operator about the thermal load on the soldering iron tip
  • T31 Series Tip Cartridges provide HAKKO’s renowned tip life with greater power at each of the two temperature selections
  • Password Lockout prevents unauthorized system setup changes
  • Tip Sleep function reduces tip temperature to preserve tip life and reduce oxidation when the iron is not in use
  • Large Backlit Display provides a clear and simple interface with the operator
  • User Programmable Profiles for tip and solder selection
  • Activity Monitor provide cumulative data on tip heater loads and tip running time to aid in process control and managing operating costs
  • Auto-Power Off safety feature
  • Compact design minimizes the workbench footprint
  • Slender, lightweight, and ergonomically designed handpiece with burn resistant cord allowing for excellent operator dexterity
  • Meets or exceeds requirements under IPC J-STD-001, ANSDI ESD S20.20 and older MIL-STDs.


Model Name FX-100
Part Number FX100-04
Voltage 120V
Power Consumption 85W
Temperature Stability & Accuracy Meets or Exceeds IPC J-STD-001
Output Power 50W
Output Frequency 13.56 MHz
Weight 6.6 lb. (3 kg)
(W x H x D)
5.0 x 5.9 x 6.6 in.
(127 x 150 x 167 mm)

Hand Piece

Model Number FX-1001
Part Number FX1001-51
Tip-to-Ground Resistance < 2 ohms
Tip-to-Ground Potential < 2mV
Length of cord 4.3 ft. (1.3 m)
Total Length (w/o cord) 7.5 in. (190 mm) w/T31-02D24 tip
Weight (w/o cord) 0.07 lb. (31 g) w/T31-02D24 tip
Tips (not included) T31-00 Series = 895°F (480°C)
T31-01 Series = 840°F (450°C)
T31-02 Series = 750°F (400°C)
T31-03 Series = 660°F (350°C)
Reach 4.3 ft. (1.3m)
Heating Element High Frequency Induction-Type


Part Number Description
FX100-04 FX-100 Soldering Station
w/ FX-1001 Soldering Iron
FH800-51BY Iron Holder
B2300 Heat resistant pad
B2419 3-wire Power Cord
B5006 Yellow Soldering Iron Grip
B5007 Green Soldering Iron Grip
B5008 Gray Soldering Iron Grip
N/A Instruction Manual




There are no reviews yet.

Be the first to review “Hakko FX-100 RF Induction Heat Soldering System”