Please note: This does not come with a Raspberry Pi Zero.
Add extra functionality to your Raspberry Pi with this cute little shim that adds six buttons to your single board computer.
- 1mm thick PCB
- 6 x momentary push buttons (6mm x 6mm x 16mm)
This kit requires soldering. It is recommended to solder the PCB to the Pi’s GPIO header first, and only then to solder on the buttons. Soldering the buttons first makes it difficult to access the GPIO pins.
No additional software is required. A code example is available in the GitHub repository linked below.
|Dimensions||9 x 6.1 x 1 cm|