EZO Dissolved Oxygen Circuit
SKU: | 510 |
Reads
€¢ Full range dissolved oxygen readings from 0.01 to +35.99 mg/L
€¢ Accurate dissolved oxygen readings down to the
hundredths place (+/- 0.2)
€¢ Temperature compensation
€¢ Salinity compensation
€¢ Pressure compensation
€¢ Flexible calibration protocol supports one point or two calibration
€¢ Calibration required only once per year with
an Atlas Scientific„¢ Dissolved Oxygen probe
€¢ Single reading or continuous reading modes
€¢ Data format is ASCIITwo data protocols
€¢ UART asynchronous serial connectivity
€¢ (RX/TX voltage swing 0-VCC)
€¢ I2C (default I2C address 0x61)
€¢ Compatible with any microprocessor that supports UART,
or I2C protocol
€¢ Operating voltage: 3.3V to 5V
€¢ Works with any off-the-shelf galvanic
€¢ HDPE dissolved oxygen probeSleep mode power consumption
€¢ 0.995mA at 3.3VCircuit Specs
€¢ Dimensions: 13.97mm X 20.16mm (0.55" X0.79")
€¢ Weight: 1.77 grams
€¢ Full range dissolved oxygen readings from 0.01 to +35.99 mg/L
€¢ Accurate dissolved oxygen readings down to the
hundredths place (+/- 0.2)
€¢ Temperature compensation
€¢ Salinity compensation
€¢ Pressure compensation
€¢ Flexible calibration protocol supports one point or two calibration
€¢ Calibration required only once per year with
an Atlas Scientific„¢ Dissolved Oxygen probe
€¢ Single reading or continuous reading modes
€¢ Data format is ASCIITwo data protocols
€¢ UART asynchronous serial connectivity
€¢ (RX/TX voltage swing 0-VCC)
€¢ I2C (default I2C address 0x61)
€¢ Compatible with any microprocessor that supports UART,
or I2C protocol
€¢ Operating voltage: 3.3V to 5V
€¢ Works with any off-the-shelf galvanic
€¢ HDPE dissolved oxygen probeSleep mode power consumption
€¢ 0.995mA at 3.3VCircuit Specs
€¢ Dimensions: 13.97mm X 20.16mm (0.55" X0.79")
€¢ Weight: 1.77 grams
Downloads :