Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

Arduino UNO Compatible Ethernet Board Mini

6.32 USD

In stock

SKU: 274 Category:

Description

This is an Ethernet Board that plugs directly into any Arduino UNO or other Arduino Board, allowing it to connect to the internet through an Ethernet connection. This allows you to control the Arduino through the internet, allowing it to post to the internet, and react to information it receives from the internet.

Product Features: 

No soldering required
Based on ENC28J60 Ethernet Chip
Works with the latest Arduino Ethernet Libraties
Works with an RJ45 cable
Network Interface HR911105A
Supply Voltage: 3.3 V
25Mhz crystal oscillator
Comes with a breakout cable so you can plug it into your Arduino (requires a male connection on the Arduino or male to male jumper wires)

Dimensions: Depth 15mm, Height 56mm, Width 34mm, Weight 14g

1 review for Arduino UNO Compatible Ethernet Board Mini

  1. Rated 5 out of 5

    (verified owner)

    This is the one to get because it has mounting holes. There is a lot of
    stress on the board from the ethernet cable attached to the rj45 connector.

    Runs at 3.3v so you should drive it from a 3.3v 328p arduino.

    Software was easy to get working. I used the UIPEthernet version 1.09.

    The ENC28J60 does generate a bit of heat. I made an ethernet temperature sensor
    and the heat required the temp sensor chip to be moved away from the ENC28J60.

Add a review