A complete toolkit with several components - Perfect to build, code, and play with your Raspberry Pi board! Compatibility Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero (sold separately) Includes 1x Solderless Prototype...

This Starter Kit comes with a great array of items to connect to Raspberry Pi or Arduino. The main components are an LCD1602 display, stepper motor, servo motor, remote, touch sensor, and ultrasonic distance sensor. You can make some amazing creations...

StereoPi Starter Kit - This kit has everything you need to get started right away.  Includes one StereoPi Standard Edition board two V1 cameras (w/ ~20 cm ribbon cables) one Raspberry Pi Compute Module 3+ Lite two...

StereoPi Deluxe Kit - This kit includes everything in the StereoPi Starter Kit and adds two wide-angle (160°) cameras (w/ ~20 cm ribbon cables). With this kit, you'll be able to run all of the demos shown on this project page and start...

Want to add more sensors or an extra tier to your DiddyBorg v2?  Our Multifunction Top Kit allows you to extend your robot to do even more :) This version is in Clear Acrylic! With the Multfunction Top Kit fitted DiddyBorg v2 can now: Attach two servos...

AdaBox005 - Break for Pi is the perfect gift for folks who are just getting started in the world of DIY electronics. It's an excellent addition to Adafruit's family of DIY projects, and this is a solderless pack. This is such a great way to test the...

This DIY CNC Kit includes: 1 x Raspberry Pi CNC Board 1 x Raspberry Pi 4 - 1GB 3 x Stepper Motor – NEMA 23 – 125 oz.in (200 steps/rev) 3 x DRV8825 Stepper Motor Driver Carrier, High Current 1 x 18V Power Supply with power cable 1 x...

Use your Raspberry Pi to take control of this string puppet. The booklet includes projects for: Keyboard control of the puppet Recording stop-frame puppet movements to play back and make the puppet move Make the puppet wave when it detects...

The CamJam EduKit 2 features the following components all neatly packaged in a project tin: 1 x Breadboard 1 x Immersible temperature Sensor 1 x PIR Sensor 1 x LDR 1 x Active Buzzer 1 x Red 10mm LED 1 x Blue 10mm LED 1 x 4.7K Resistor 2 x 330 Resistor...

The CamJam EduKit features the following components all neatly packaged in a project tin: A 400-point breadboard 3 LEDs (Red, Yellow and Green) A button A buzzer Resistors and jumper cables The kit is accompanied by a set of downloadable worksheets...

MONK MAKES - PROJECT BOX 1 FOR RASPBERRY PI This kit contains everything you need (except a Raspberry Pi) to build 10 amazing electronics projects with your Raspberry Pi: Blinking LED Blinking two LEDs Color display using an RGB (Red,...

Want to add more sensors to your DiddyBorg v2?  Our Sensor Mount Kit allows you to add 4x ultrasonics and an extra Pi camera to your robot. The kit consists of: 4x Ultrasonic mounts 1x Camera mount 16x M1.7 screws and nuts 2x M2 screws, washers and nuts...

Want to add more sensors or an extra tier to your DiddyBorg v2?  Our Multifunction Top Kit allows you to extend your robot to do even more :) With the Multfunction Top Kit fitted DiddyBorg v2 can now: Attach two servos to the top plate, great for robot...

The MonkMakes Clever Card Kit for Raspberry Pi will provide you with hours of entertainment building projects that can read and write from 13.5MHz contactless RFID smart cards. The kit includes the following items: A MFRC522 smart card reader/writer 6 x...

The Cluster HAT is the perfect tool for modelling, testing and teaching small scale clusters. The Cluster HAT is designed to interface a controller (Raspberry Pi A+/B+/2/3) with 4 Raspberry Pi Zero's configured to use USB gadget mode. This Kit...

  The MonsterBorg can be programmed as a self-driving robot, used for education about self-driving systems, or raced around the garden as an RC off-roader. It also makes a great platform for hacking about with robots by adding extra sensors or...

Our most popular Raspberry Pi robot kit DiddyBorg is back with faster motors and a newly designed chassis! The idea remains the same, a 6 wheeled high-torque robotics platform, but give everyone the ability to add lots of extra functionality and get your...

Build your very own internet-connected radio with the Pirate Radio Kit! This kit has everything* you'll need, including a Pi Zero W, Pimoroni's flash new pHAT BEAT DAC and stereo amp, a 5W speaker, and a beautifully retro acrylic enclosure to make it...

This is the big one, the bee's knees, the bling king (or queen), the ultimate Flotilla kit! You'll get fourteen Flotilla modules, three complete kits - our audibly offensive Noisemaker synth, a cute little paper-craft mood light, and an all-singing,...

5.... 4.... 3.... 2.... 1.... Turn your Raspberry Pi into a spaceship! This robot chassis is designed to be used with Pimoroni's Explorer HAT Pro, or Explorer pHAT boards though it will work with other motor drivers! The kit is a great way to...