Notice: this is a special "green" version with a tall 16mm header. You can take a look at the "black" version with 12mm pins header.  Introducing our own uninterruptible power source for the Raspberry Pi! The UPS hat is powerful enough to...

The Allo Nirvana SMPS was designed to power audio devices with the lowest noise. Two years was spent developing this product, the longest of any Allo product to date! There are 3 types of noise: 1. Differential noise (noise on power lines compared to...

USB-C Power Supply - 5.1V 3.0A - UL Listed - Black - For Raspberry Pi 4B 1GB/2GB/4GBThis is a high quality switching ‘wall wart’ AC to DC 5.1V 3.0A USB-C wall power supply manufactured specifically for projects that require a higher level of...

Tiny-UPS provides full UPS functionality for USB power. Use a Li-Polymer or Li-Ion battery to get the UPS functionality. Size and capacity of the battery does not matter to Tiny-UPS. The charge time and run time vary according to the battery capacity...

Music and linear power supply have been always a good match. The main problems of LPS is extremely inflated pricing and no data. Using a transformer will not automatically give you a better PSU. Worst is that most of manufacturers include no testing.....

Do you have a microUSB charger that you'd love to use with a newer USB-C device? Here's what you need! This adapter changes a microUSB male connector to a USB-C male connector. Also available in white.

Do you have a microUSB charger that you'd love to use with a newer USB-C device? Here's what you need! This adapter changes a microUSB male connector to a USB-C male connector. Also available in black.

The official Raspberry Pi USB-C power supply for the Raspberry Pi 4B. If the black power supply is out of stock, it still might be available in white. This 15W power supply features the USB-C connection found on the Raspberry Pi 4. It provides 3...

The official Raspberry Pi USB-C power supply for the Raspberry Pi 4B. If the white power supply is out of stock, it still might be available in Black. This 15W power supply features the USB-C connection found on the Raspberry Pi 4. It provides 3...

Introducing our own uninterruptible power source for the raspberry pi! The UPS hat is powerful enough to continuously deliver 3 Amps of current to the Raspberry Pi , Ultra lower power STM32 controller is used to make the Raspberry pi last longer when...

12,000 mAh Lithium Ion battery that can be used with the PiJuice HAT module. The PiJuice HAT comes with a 1820mAh as standard, so this 12,000mAh will give you a massive boost! Perfect for remote projects where you want to ensure PiJuice will...

5,000 mAh Lithium Ion battery that can be used with the PiJuice HAT module. The PiJuice HAT comes with a 1820mAh as standard, so this 5,000mAh will give you a massive boost! Perfect for remote projects where you want to ensure PiJuice will keep running...

Waveshare 15141 - Li-ion Battery HAT for Raspberry Pi, 5V Regulated Output, Bi-directional Quick Charge The Li-ion Battery HAT integrates the SW6106 power bank management chip, providing 5V regulated power supply to your Pi from a 14500...

After testing a number of options for mobile-powering a Pi we now can offer this cost-effective and powerful battery pack. We tested it with all Pi boards. It worked fine with all boards. We did occasionally get under-power icon for 3B+ BUT the board ran...

The Texas Instruments TPS2113A autoswitching power multiplexer allows you to switch seamlessly between two power sources of 2.8 V to 5.5 V while blocking reverse current into either source. The power multiplexer (or mux) has an adjustable...

PiJuice HAT is compatible with Raspberry Pi 4. Please check our portable Solar Panels specifically designed and manufactured for PiJuice! As one of the smallest systems around there are so many amazing things you could do with the Raspberry Pi if it...

This is the newer version of the PoE HAT, unaffected by the "underachieving USB current" syndrome. Important note: not all Pi cases are PoE HAT compatible. Please check short video below that should help you to pick right case for your PoE HAT...

 Specs: Plug Type: Aus, Euro, US Input Voltage AC: 100V - 240V Output Voltage Nom. 5V Output Current Max: 3A Power Supply Output Type: Fixed Output Connector: USB Micro Cable Length : 45 inch

The PiJuice 40 Watt Solar panel is the ideal way to charge and/or power your PiJuice HAT and Raspberry Pi for free when you’re in a sunny location. By using a solar panel and PiJuice, containing our revolutionary PiAnywhere technology,...

The PiJuice 12 Watt Solar panel is the ideal way to charge and/or power your PiJuice HAT and Raspberry Pi for free when you’re in a sunny location. By using a solar panel and PiJuice, containing our revolutionary PiAnywhere technology,...