Raspberry Pi Dual-Band 5GHz/2.4GHZ USB WiFi Adapter with Antenna $15.95 This adapter requires installation of a third-party driver. Although it is relatively simple, PLEASE READ THE INSTALLATION INSTRUCTIONS and ensure you are comfortable following them before buying this adapter. Updating the kernel requires... READ MORE
Open Box - Raspberry Pi GSM/GPRS Board (SIM800) $29.95 Please note that this is an open box item. Note - This product is not compatible with the Raspberry Pi 4 (unless using a GPIO extension) WARNING: This HAT works on 2G GSM network which is shutting down in the USA over the course of 2020 and... READ MORE
BitScope Blade Rack 20 - BR20A $1,295.00 The Duo Pi Blade Rack is a compact cluster server built using ten Duo Pi boards (mounted in a pair of Duo Pi Blade Packs) which can power and mount up to twenty Raspberry Pi without complicated power wiring. It's... Add to Cart
USB XBee Adapter $41.95 This low cost XBee USB Adapter Board comes in partially assembled kit form and provides a cost-effective solution to interfacing a PC or microcontroller to any XBee or XBee Pro module. The PC connection can be used to configure the XBee Module through... Add to Cart
XBee Pro Module - ZB Series 2SC - 63mW with Wire Antenna - XBP24CZ7WIT-004 $52.95 This is the PRO Series 2 ZigBee protocol 63mW with wire antenna. It's good for point-to-point, multipoint and mesh networks. This module is a little more difficult to get going than the Series 1 - you must set up a "coordinator" module so they are not as... READ MORE
BitScope Blade Rack 40 (40 x Raspberry Pi) - BR40A $1,395.00 40 Node compute cluster in a 19" rack for Raspberry Pi. Comprises 10 x Quattro Pi, metalwork, rack hardware and power wiring. Accepts 9V to 48V connected via the power plates. Up to 30A (40A surge) power budget. Raspberry Pi network switch... READ MORE
BNC Port Adapter (for Bitscope Micro) - MP01A $39.95 Dual channel BNC adapter for BitScope Micro. Includes 6 logic inputs and switchable waveform and clock generator outputs. MP01A is a dual channel BNC adapter for BitScope Micro. It allows the use of industry standard oscilloscope... READ MORE
Throwing Star LAN Tap Pro $49.95 The Throwing Star LAN Tap is a passive Ethernet tap, requiring no power for operation. There are active methods of tapping Ethernet connections (e.g., a mirror port on a switch), but none can beat passive taps for portability. To the target network, the... READ MORE
Raspberry Pi GSM/GPRS Board (SIM800) $19.95 $52.95 Note - This product is not compatible with the Raspberry Pi 4 (unless using a GPIO extension) WARNING: This HAT works on 2G GSM network which is shutting down in the USA over the course of 2020 and beyond, so please be aware these are not for long term... Add to Cart
PiTalk - Modular SmartPhone for Raspberry Pi $89.95 Screen and Raspberry Pi Board not Included PiTalk - Modular and IoT enabled Smartphone based on Raspberry Pi First ever modular and IoT enabled smartphone to be developed on the Raspberry Pi. Compatible with Raspberry Pi zero, Pi 2 and Pi 3. PiTalk... READ MORE
7FT Cat6 Ethernet Cable $2.95 Cat6 Ethernet Patch Cable - Snagless RJ45, Stranded, 550Mhz, UTP, Pure Bare Copper Wire, 24AWG, 7ft, Black Save the time and hassle of building Ethernet cables by using these fixed-length UTP Cat6 Ethernet Network Cables! Features Unshielded Twisted... Add to Cart
Raspberry Pi PoE HAT $32.95 This is the newer version of the PoE HAT, unaffected by the "underachieving USB current" syndrome. Important note: not all Pi cases are PoE HAT compatible. Please check short video below that should help you to pick right case for your PoE HAT... Choose Options
BitScope Blade Rack $345.95 The BitScope Blade Rack is a 1RU server built with Quattro Pi. It is populated with up to four Raspberry Pi and includes a built-in five port network switch. BR04A is perfect for building low cost multiprocessor servers... Add to Cart
GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi $44.95 This is a handy, low power Raspberry Pi HAT which features multi communication functionalities: GSM, GPRS, GNSS and Bluetooth. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, global position, transfer data... READ MORE
Ethernet Hub and USB Hub w/ Micro USB OTG Connector $14.95 $19.95 One can never have enough socks, or USB ports. Add some more USB and Ethernet capability to your Raspberry Pi Zero or, really, any kind of tablet or computer with an OTG connector with this USB 2.0 and Ethernet Hub! This handy combo-hub has 3 USB 2.0... Add to Cart
Antenna 2.4Ghz HG R-SMA BLACK 5" $7.45 Use this antenna to improve your WLAN or Zigbee signal strength. The RP-SMA connector and pivoting design make it easy to attach and orient. Specifications: Frequency Range: 2.4GHz ~ 2.5GHz Antenna Type: Whip, Tilt Number of Bands: 1 VSWR: 1.9 Gain: 3... Add to Cart
USB 2.0 and Ethernet Hub - 3 USB Ports and 1 Ethernet $17.95 $19.95 One can never have enough socks, or USB ports. Add some more USB and Ethernet capability to your Raspberry Pi or, really, any kind of computer with this USB 2.0 and Ethernet Hub! This handy combo-hub has 3 USB 2.0 ports, and a AX88772A... Add to Cart
Wireless-N 300Mbps USB WiFi Adapter - HX9500 $14.95 Operates in 2.4 GHz frequency bands Frequency: 2.4 GHz, 2.312-2.472 GHz, 2.484 GHz 2x2 MIMO (2T2R) technology improves effective throughput and range over existing 802.11 b/g products Data rates: up to 300Mbps 802.11e-compatible bursting and I... READ MORE
Long-Range 300Mbps Wireless-N Adapter $16.95 The best one we have. Offers the best coverage and high data transfer speed. Works with Raspbian/OpenELEC "out of the box". - Chipset: Realtek 8192CU (HX9700) - WiFi: 2.4Ghz IEEE802.11b/g/n - USB 2.0 - Max. 300Mbps - WPS - 5dBi RP-SMA antenna - Access... READ MORE
5FT Cat6 Ethernet Cable $1.45 Connects any CAT6 application such as computer to hub, patch panel or wall jack. This 550MHz CAT6 PVC stranded patch cord meets TIA/EIA 568A specifications, and support all CAT6 and other high speed applications. It has stranded wires for added cable... Add to Cart