Features Works with VOLT+ With Stepped Attenuator 60W, 3.15Amps DC Male Jack: 3mm x 6.5mm Audiophile low level noise / ripple Comes with the wall plug for your region (UK/US/EU) Support & Downloads CLICK HERE FOR AUDIO...

SPECS: Plug Type: Aus, Euro, US Input Voltage AC: 100V - 240V Output Voltage Nom. 5V Output Current Max: 3A Power Supply Output Type: Fixed Output Connector: USB Micro Cable Length : 45 inch

The Allo Nirvana SMPS was designed to power audio devices with the lowest noise. Two years was spent developing this product, the longest of any Allo product to date! There are 3 types of noise: 1. Differential noise (noise on power lines compared to...

Specifications Input voltage: 100~240VAC / 50/60Hz Output voltage: 24V Output current: 3.3A Output connector: C14, 5.5mm*2.1mm*12mm, 1500mm AC cable: 1000mm Standards: UL

USB-C Power Supply - 5.1V 3.0A - UL Listed - Black - For Raspberry Pi 4B 1GB/2GB/4GBThis is a high quality switching ‘wall wart’ AC to DC 5.1V 3.0A USB-C wall power supply manufactured specifically for projects that require a higher level of...

Music and linear power supply have been always a good match. The main problems of LPS is extremely inflated pricing and no data. Using a transformer will not automatically give you a better PSU. Worst is that most of manufacturers include no testing.....

This is a beefy switching supply, for when you need a lot of power! It can supply 12V DC up to 5 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan but you can use any plug adapter for your country, or just replace the...

These ultra-compact wired RAC03-SE/277 modules provide an output voltage of 5V, and the input-to-output isolation is 3kVAC/1min. With a standby consumption of 30mW typical, the mini power supplies are particularly suitable for energy-saving sleep mode...

The Texas Instruments TPS2113A autoswitching power multiplexer allows you to switch seamlessly between two power sources of 2.8 V to 5.5 V while blocking reverse current into either source. The power multiplexer (or mux) has an adjustable...

This is an inverter for EL wire and tape, similar to our pocket inverters, except it is a brick that takes 12V input instead of 2 AA batteries. This means its good for 'fixed' installations since you can just plug it into a 12V wall adapter. It's also...

Compatible with the JustBoom Amp HAT and JustBoom Amp Zero. This 60W to 65W 15v power supply has a 100-240VAC input and comes supplied complete with UK, European, USA and Australian pins as standard. This carries full international safety approvals...

This power adapter was made to specifications guaranteeing the lowest ripple and noise possible. This helps in the quest to achieve the highest possible sound quality. Includes interchangeable wall plug heads for US, and the EU. The cord is 1.5m with a 5...

Description PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be able to keep your power-hungry project running even while recharging the battery! This little...

The squarish board with two chips on it is the transmitter (power with 9V).  The longer board is the output and you can connect that to the part of your project that needs powering. Inductive charging is a way of powering a device without a direct wire...

Say goodbye to hazardous high voltage wiring and create the Internet of Things with safe, reliable power control. The IoT Power Relay from Digital Loggers is custom designed to fit your every need when developing projects...

This is 60W power supply is perfect for the HiFiBerry Amp+, JustBoom Amp, and many other applicatons. Specifications 18V output voltage 3.3A output current 2.1mm x 5.5mm x 12mm barrel jack output connector Accepts 100-240V input voltage Includes 120V...

5V 2A USB power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone or anything else that's power hungry! This adapter was specifically designed to provide 5.25V not 5V, but we still call it a 5V USB adapter...

This is a really nice power supply. It's a switching DC supply so its small and light and efficient. It is thin so it fits in power strips without blocking other outlets. The output is regulated so you'll get a steady 9V up to 1000mA (1 Amp) of current...

This is a beefy switching supply, for when you need a lot of power! It can supply 5V DC up to 10 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan but you can use any plug adapter for your country, or just replace the...

The Power Switch Tail II is a smart alternative to slicing apart power cords to wire up your own relays. Its a compact 120V 3-pronged extension cord, with a relay board embedded in the middle. Connect to the relay using two screw terminals and activate...